Comparison of the physical properties of hardwood and softwood
Antonsson, S., Mäkelä, P., Fellers, C. and Lindström, M. E. (2009)
Delamination position in multi-ply paperboeard achieved by different testing methods
Girlanda, O., Fellers, C. (2008)
Appita 61(4):107-112.
Modelling delamination in paperboard during sheet offset printing
Girlanda, O., Fellers, C. (2008)
Appita 61(2):113-119.
Verification of fracture mechanics theory and aspects of its practical use
Nordhagen, H., Gregersen, O. W., Mäkelä, P. (2008)
Progress in Paper Physics Seminar, pp. 231-234, Helsinki University of Technology, Espoo.
Effect of relative humidity cycle start point and amplitude on the mechano-sroptive creep of containerboard
Fellers, C., Panek, J. (2007)
Appita Annual Meeting, Appita, Carlton.
Mechanical properties of paper and their relation to packaging performance
Henriksson, L., Bredemo, R., Fellers, C., Stubbfält, G. (2007)
Appita Annual Conference, Appita, Carlton.
In-plane hygro-viscoelasticity of paper at small deformations
The effect of moisture ratio and drying restraint on the stress relaxation of paper
Mäkelä, P. (2007)
Appita annual conference, Appita, Carlton.
Measuring out-of-plane shear properties of paperboard
Nygårds, M., Fellers, C., Östlund, S. (2007)
J. Pulp Pap. Sci. 32(2):105-109.
Effect of fibre shape and fibre distortions on creep properties of kraft paper in constant and cyclic humidity
Panek, J., Fellers, C., Haraldsson, T., Mohlin, U.-B. (2005)
Advances in Paper Science and Technology, vol. 2, pp. 777-796, The Pulp and Paper Fundamental Research Society, Bury.
Predictions of anisotropic multiply board properties based on isotropic ply properties and drying restraints
Wahlström, T., Mäkelä, P. (2005)
Advances in Paper Science and Technology, vol. 1, pp. 241-281, The Pulp and Paper Fundamental Research Society, Bury.
The influence of through-thickness variation on the mechanics of paper drying
Östlund, M., Mäkelä, P., Östlund, S. (2005)
Advances in Paper Science and Technology, vol. 1, pp. 213-240, The Pulp and Paper Fundamental Research Society, Bury.
Residual stresses in paperboard through the manufacturing process
Östlund, M., Östlund, S., Carlsson, L.A., Fellers, C. (2005)
J. Pulp Pap. Sci. 31(4):197-201.
A method for determinantion of delamination toughness in different positions in the thickness direction of paperboard
The influence of drying restraints and beating degree on resisual stress build-up in paperboard
Östlund, M., Östlund, S., Carlsson, L. A., Fellers, C. (2004)
J. Pulp Pap. Sci. 30(11):289-293.
The influence of drying conditions on residual stress build-up in paperboard
Östlund, M., Östlund, S., Carlsson, L. A., Fellers, C. (2004)
J. Pulp Pap. Sci. 30(11):312-316.
Analysis of the paper web during its passage through the drying section
Mäkelä, P. (2003)
International Paper Physics Conference, pp. 151-155, PAPTAC, Montreal.
Friction of linerboard based on recycled fiber
Garoff, N, Nilvebrant, N.-O., Fellers, C. (2002)
J. Appl. Polym. Sci. 85(7):1511-1520.
Predicting the effect of reinforcment pulp characteristics in TMP papers for web breaks using fracture mechanicsFellers, C., Melander, J., Mohlin, U.-B. (2001)
Nord. Pulp Pap. Res. J. 16(4):257-260.
Measuring the stress-strain properties of paperboard in the thickness direction
Stenberg, N., Fellers, C., Östlund, S. (2001)
J. Pulp Pap. Sci. 27(6):213-221.
Laboratory method for biaxial straining of paper during drying
Wahlstrom, T., Fellers, C., Htun, M. (2000)
Tappi J. 83(7):75.
Paper friction - influence of measurement conditions
Johansson, A., Fellers, C., Gunderson, D., Haugen, U. (1998)
Tappi J. 81(5):175-183.